Audi Lost Car Key 2016-12-19T23:21:11+00:00

#Help I’ve lost my Audi car keys

Audi Replacement Car Keys

From £90

Have you lost your Audi car key?

We can cut you a replacement key from a spare or make a new key by dismantling the lock, with no damage to your vehicle. We’ll even programme your new key so it will work with your immobiliser.

Call our Audi experts Now

How to Programme a Audi Remote Car Key?

Unlike main car dealers our instant service and low costs mean that the inconvenience of losing or damaging your key can be kept to a minimum and you can continue with your day with little interruption.

I’ve lost my spare Audi car key

Here at AutoLocks we are a team of specially trained technicians who can be in with you in as little as 30 minutes. We will get to work straight away to provide you with a replacement for your damaged or lost Audi key. Our state of the art equipment means that we can work on site, at your home, your place of work or at the roadside.

We sell Audi Remote Car Keys

View all our Audi Car Keys

AutoLocks can be with you in as little as 30 minutes and we service the London, Essex, Kent, Surrey, Sussex and Hertfordshire areas

We cover London and Kent

How we programme a Audi Remote Car Key

If you have lost your Audi key and are looking for a replacement or if it is damaged and you need it repaired our specially trained auto locksmiths are available either by appointment or on emergency call out to get you back on the road.

  • Audi A1
  • Audi A3
  • Audi A5
  • Audi TT
  • Audi Q3
  • Audi Q7

Want to learn more? We have some greats tips and hacks for your Audi

Read some of our Audi blog articles.

View all our Audi blog articles

Audi Hints & Hacks

Hints & Hacks (Audi) 2016-12-20T11:52:41+00:00

1. New Keys – Must be ordered to the vehicle chassis from the dealer. When received the keys will start the car as they are already pre-coded. However the remotes will require programming by following the procedure identified within this manual.

2. Once the 10 key limit has been reached, the addiction of any further keys is prohibited and they ECU has to be replaced.

3. Automatic Vehicles – On vehicles fitted with automatic transmission the start sequence will only be enabled by the EWS3 if the gear selector is in either P or N position.

4. Run On Time – This feature enables the car to be started with any mechanically fitting key within 10 seconds, From the time the ignition key is in the ‘0’ position.

5. New Programmed Key – The first time a newly programmed key is used to start the vehicle, there will be 1-2 second delay. After this initial period the vehicle will start without delay as normal.

6. Remotes – Make a note of which memory locations are being used as this will be improtant when programming in new remotes.

Existing remotes are normally programmed in the first two memory locations.

If you program a remote into a memory location that is already used, the existing remote in this location will be overwritten. If this happens the only way to re-program the original remote is by having the original bar code information and the following program remote procedure.1. New Keys – Must be ordered to the vehicle chassis from the dealer. When received the keys will start the car as they are already pre-coded. However the remotes will require programming by following the procedure identified within this manual.

2. Once the 10 key limit has been reached, the addiction of any further keys is prohibited and they ECU has to be replaced.

3. Automatic Vehicles – On vehicles fitted with automatic transmission the start sequence will only be enabled by the EWS3 if the gear selector is in either P or N position.

4. Run On Time – This feature enables the car to be started with any mechanically fitting key within 10 seconds, From the time the ignition key is in the ‘0’ position.

5. New Programmed Key – The first time a newly programmed key is used to start the vehicle, there will be 1-2 second delay. After this initial period the vehicle will start without delay as normal.

6. Remotes – Make a note of which memory locations are being used as this will be improtant when programming in new remotes.

Existing remotes are normally programmed in the first two memory locations.

If you program a remote into a memory location that is already used, the existing remote in this location will be overwritten. If this happens the only way to re-program the original remote is by having the original bar code information and the following program remote procedure.

We have Audi technicians on hand to answer any of your queries

Call our Audi Technicians