Fiat Lost Car Key 2017-02-16T10:28:30+00:00

#Help I’ve lost my Fiat car keys

Fiat Replacement Car Keys

From £70

Have you lost your Fiat car key?

If you require a new key our specialist technician will work on site to provide you with a replacement there and then. If you have lost all of your keys we will dismantle the lock in order to cut you a new key.
We guarantee your vehicle will not be damaged during this process and best of all we can gain entry to your car and hand over your new key in as little as 30 minutes.

Call our Fiat experts Now

How to Programme a Fiat Remote Car Key?

Our specialist experts have all the essential training and tools required to get you back in your Fiat and on the road!

I’ve lost my spare Fiat car key

All of our work is done on site eliminating the high costs and long wait times that come with returning to your main car dealer for your replacement Fiat key.

We sell Fiat Remote Car Keys

View all our Fiat Car Keys

Looking for a fast and cost effective Fiat key replacement service? You have come to the right place.

We cover London and Kent

How we programme a Fiat Remote Car Key

We can also repair damaged keys to prevent an issue becoming a problem and programme keys so that they work with your vehicles immobiliser.

  • Fait 500
  • Fiat Bravo
  • Fiat Doblo
  • Fiat Panda
  • Fiat Punto
  • Fiat Scudo

 

Want to learn more? We have some greats tips and hacks for your Fiat

Read some of our Fiat blog articles.

View all our Fiat blog articles

Fiat Hints & Hacks

Adding a Key Manually on Red Key (master) early systems 2016-12-20T15:03:38+00:00

1. Insert red key, Turn ignition on and off again as soon as the immobiliser light goes out.
2. Within 10 seconds, remove the master key and insert the first additional key to be programmed.
3. Switch ignition on and back off again as soon as the immobiliser goes out.
4. Within 10 seconds repeat the procedure for subsequent keys, A max of 7 keys can be programmed using this method.
5. After all keys have been programmed, close the system by inserting the master key and turning the ignition on and off, immediately after the immobiliser light goes out.

Emergency Key Access 2016-12-20T15:02:09+00:00

On early vehicles the EKA can be gained by using the 4 digit code as follows:
1. Turn the ignition on and when the EMS light illuminates and extinguishes, press the accelerator pedal to the floor and release.
2. When the EMS starts to flash, count the number of flashes and when the first digit has been flashed, press the accelerator pedal to the floor and release.
3. Continue this method until all 4 digits have been entered and then the car should be able to be started.

SCUDO 2016-12-20T15:01:29+00:00

New remotes cannot be programmed without the use of diagnostic equipment but existing remote can be synchronised as follows:
1. Switch on the ignition
2. Wait for the system LED to extinguish
3. Press the lock or unlock and hold for 10 seconds, do this on all remotes to synchronise them.

ULYSSEE 2016-12-20T14:59:57+00:00

New remotes cannot be programmed without the use of diagnostic equipment but existing remote can be synchronised as follows:
1. Switch on the ignition
2. Press the lock or unlock button and hold for 10 seconds
3. Press the lock or unlock button and hold for 10 seconds, do this on all remotes to synchronise them.

COUPE/BARCHETTA 2016-12-20T14:59:24+00:00

1. Firstly obtain the 4 digit security code for the vehicle
2. Press button (in the interior light assembly there is a button and an LED next to alarm ultrasonic) for about a second and the LED will flash.
3. Release the button
4. After approx 5 seconds the LED will flash once
5. Enter the first of security code using the button as above.
6. wait for about 5 seconds and the led will flash once
7. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for single flash requesting the next digit.
8. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the right hand button near the interior light (used above)
9. The LED will continue to until you press a button of a remote- then remain on.
10.Release button of remote and the one in the interior light.

BRAVO/BRAVO 2016-12-20T14:58:49+00:00

1. First obtain the 4 digit security code for the vehicle
2. Press the button, (in the interior light assembly there is a button and LED next to the alarm ultrasonics ( for about a second and LED will flash.
3. Release the button
4. After approx 5 seconds the LED will flash once,
5. Enter the first digit of the security code using the button as above. Wait for about 5 seconds and the LED will flash once.
6. Enter the second digit of the security code as above – if one of the digits is zero, do not press the button at all and wait for the single flash requesting the next digit.
7. If all numbers are entered correctly the led will flash for 10 seconds whilst the led is lashing, press and hold the right hand button near the interior light (used above)
8. The LED will continue to flash until you press a button of a remote – it will then remain on,
9. Release button of remote and the one in the interior light.

CINQUECENTO 2016-12-20T14:58:09+00:00

1. Firstly obtain the 4 digit security code for the vehicle
2. Press the button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics) for about a second and the LED will flash
3. Release the button
4. After approx 5 seconds the LED will flash once
5. Enter the first digit of the security code using the button as above
6. Wait for about 5 seconds and the LED will flash once
7. Enter the second digit of the security code as above – if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.
8. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the button near the interior light (used above)
9. The LED will continue to flash until you press a button of a remote- will then remain on.
10. Release button of remote and the one in the interior light.

SEICENTO 2016-12-20T14:57:33+00:00

1. First obtain the 4 digit security code for the vehicle
2. Press the button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics for about a second and the LED will flash.
3. Release the button.
4. After approx 5 seconds the LED will flash once.
5. Enter the first digit of the security code using the button as above
6. Wait for about 5 seconds and the LED will flash once. Enter the second digit of the security code as above – if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.
7. If all the numbers are entered correctly the LED flash will flash for 10 seconds whilst the LED is flashing, press and hold the button near the interior light (used above) The LED will continue to flash until you press a button of a remote it will then remain on.
8. Release button of remote and the one in the interior light,

Hints & Hacks (Fiat) 2016-12-20T14:56:34+00:00

1. Any keys not programmed t this point will be deleted permanently, including existing keys.

2. The pin code for remotes is different from the pin code for the keys. Please request both alarm code (for remote) & immobiliser code (for keys) from the dealer.

We have Fiat technicians on hand to answer any of your queries

Call our Fiat Technicians